Lots of new accessories and restocked items from PTS are availabe at their site. Find them all below and get yours if you want to.

PTS MASADA 11.5″ BARREL SET

unnamed-1unnamed-3

The PTS 11.5″ Barrel Set is a tool-less quick change barrel system designed exclusively for the PTS Masada Gas Blowback Rifle. The Masada’s inner barrel and hop-up unit (both are included and pre-installed into the barrel set) is captured within the quick change barrel system. This 11.5″ barrel can be swapped with the standard length Masada barrel system with ease allowing the Masada to be reconfigured into a SBR (Short Barrel Rifle) as needed.

unnamed-2

 

PTS ENHANCED POLYMER BACK-UP IRON SIGHT (EPBUIS)

unnamed-4

The Enhanced Polymer Back-Up Iron Sights (EPBUIS) are built with the PTS EP series standard Dupont Zytel High Performance Reinforced Polymer for a high quality product that is both durable and lightweight. The EPBUIS consists of a low-profile, snag-free design that is unobtrusive when retracted. The aggressively textured surfaces on the sides of the sights aid in slip-free, positive manipulation under any adverse conditions that may affect grip.

unnamed-5

The rear sight has a large and small sliding aperture that can be toggled for either close-range, fast, sight picture acquisition shooting or long-distance precision shooting. The dual apertures feature a ribbed
texture on the back and an over-molded ledge on the front for easier manipulation and increased surface contact on the aperture plate allowing you to have control from either side. Windage adjustments can be found on the rear sight and elevation adjustments can be found on the front sight, thus giving the shooter maximum adjustability and versatility.

unnamed-7

PTS GRIFFIN ARMAMENT M4SD-II MOCK SUPPRESSOR GEN 2

unnamed-8

One of the top performing suppressors on the market, the PTS Griffin Armament M4SD-II is back with a second generation that encompasses the latest Griffin Armament suppressor design. The special machined fluted surface design reduces weight while increasing body strength. The M4SD-II’s compact 6.6 inch length aids in maneuverability and minimally affects the weight balance of the gun. It also features Griffin Armament’s trademark SDQD mounting interface, well-known as one of the fastest and most secure mounting interfaces on the suppressor market.

unnamed-11

Compatibility – Marui spec Airsoft A2 Flash Hider, PTS Griffin Armament M4SD & M4SDII Muzzle Devices.
Material – Aluminum
Color – Black & Dark Earth

 

PTS GRIFFIN ARMAMENT M4SD-K MOCK SUPPRESSOR GEN 2

unnamed-10

The second generation version of the PTS Griffin Armament M4SD-K Mock Suppressor encompasses the latest Griffin Armament suppressor design.  The special machined fluted surface design reduces weight while increasing body strength. The 5.75 inch long M4SD-K’s ultra-compact size aids in maneuverability and minimally affects the weight balance of the gun. It also features Griffin Armament’s trademark SDQD mounting interface, well-known as one of the fastest and most secure mounting interfaces on the suppressor market.

unnamed-9

• Compatibility – Marui spec Airsoft A2 Flash Hider, PTS Griffin Armament M4SD & M4SDII Muzzle Devices.
• Material – Aluminum
• Color – Black & Dark Earth

 

PTS GRIFFIN M4SD MUZZLE BRAKE

unnamed-12

The Griffin Armament M4SD Muzzle Brake is designed purely to maximize recoil control and muzzle movement. It is perfect for rapid shooting situations such as competitions where minimal rifle and sight movement during rapid shooting is important for very fast and accurate follow up shots.

The Airsoft version has been designed to be compatible with any A2-compatible suppressor mount including the PTS Griffin Armament M4SD Suppressor.

unnamed-13

PTS ENHANCED POLYMER STOCK (EPS)

unnamed-14

The PTS Enhanced Polymer Stock (EPS) is a full function collapsible polymer stock that offer the user lots of flexibility in how to utilze it.  Like all the other PTS polymer products, it is manufactured with authentic Dupont Zytel polymer for superior wear and damage resistance and durability.  The PTS EPS features a rubberized removable buttpad for comfort and a slip resistant grip.  Fixed side storage compartments offer enhanced comfort and a consistent cheek weld. The side storage compartments measure up to 139 x 31 mm of spacing so you can fit 2 piece butterfly style 2/3A cell NiMH batteries or Lipo batteries to power your electric airsoft gun or you can use the compartments for AA, AAA, CR123A battery or miscellaneous parts storage. Additionally, the rear portion of the stock can fit a 9.6V NiMH minibattery or a LiPo battery of similar size as well as be used for miscellaneous storage.  There are multiple sling mounting options featured on the stock including QD swivel sockets on both sides with a pass-through channel for loop type sling attachments and a sling slot on the front side of the butt part of the stock.

The EPS Stock is compatible with almost all AEG and GBBR buffer tubes.

PTS PDR-C GRIP EXTENSION

unnamed-17

The PTS Enhanced Polymer Foregrip – Short, or EPF-S, is a simple yet highly functional short polymer foregrip for any gun needing additional front end support. The EPF-S Foregrip has a carefully conceived streamlined ergonomic design. The resulting EPF-S is not only stylish but also extremely comfortable to use. The EPF-S has a storage compartment with a sliding access plate at the base to store miscellaneous items and tools.

unnamed-18

 


For more news about PTS on our site, please visit: www.airsoft-military-news.com/ptssyndicate

Connect with PTS Syndicate pts_syndicate_logo

PTS Syndicate US Website
PTS Syndicate on Facebook
PTS Syndcate on Twitter
PTS Syndicate on Instagram
PTS Syndicate on Youtube